Heating

Why Is There Heat but No Hot Water from the Boiler

P
•

Confirm the boiler is on, then feel a radiator or a run of baseboard in the zone that should be heating. Warm metal and a cold tap means the heat is moving and the showers are not.

On many boilers, the taps are fed by a coil or an indirect tank. That side can quit while the radiators stay warm. Book boiler repair, or request service and say the heat is on and the hot water is not. If the showers work and the rooms are cold, that is a different problem: hot water but no heat from the boiler.

First safe step

Look at the boiler. It should be running, not sitting cold and silent. Feel one radiator or a length of baseboard on the zone the thermostat is calling for. If that zone is warm and the hot taps are still cold, stop there and book the repair. Do not open the cabinet. If you smell gas, leave the building, call 911 and the utility from outside, then use gas leak detection.


1What you are seeing

The house has heat. The hot side of the faucet does not. Cold water still runs. That split matters. The boiler is sending heat into the zone, and hot water is not reaching the taps. A coil, an indirect tank, or the control that feeds them can fail while the heating loop keeps working.

If the showers are hot and the rooms are cold, read hot water but no heat from the boiler. If the boiler is cold and silent, and you have no heat and no hot water, start with no hot water this morning.

2What to check before you call

Do this, then stop:

  1. Confirm the boiler is on. If it is cold and silent, and you also have no heat, use no hot water this morning.
  2. Feel a radiator or a run of baseboard in the zone that should be heating. Warm metal means the heat is reaching that zone.
  3. Run a second hot tap. Every hot tap cold points to the coil or the indirect tank. One cold faucet, with the others hot, is that fixture.
  4. Leave the cabinet, the coil, and the temperature dial alone.
Hydronic boiler piping with an expansion tank

Do not turn the temperature up

Raising the water-temperature setting, or opening the boiler jacket, does not bring a failed coil or a cold indirect tank back. If the hot water returns all at once, it can scald. Book the repair.

3If the symptom is different

Match the guide to what the house is actually doing.

Book the repair

When the zone is warm and the taps are cold, book boiler repair.

  • 1Boiler repair: the zone is warm and the hot taps are cold.
  • 2Request service or call (774) 226-6062: say the boiler was on, the zone was warm, and whether every hot tap was cold. Shop hours are Monday–Friday, 7:30 AM–4:00 PM, Saturday by appointment.

Heat on, tap cold FAQs

Why are the radiators warm if the hot water is cold?

The heating loop can keep working while the coil or indirect tank that feeds the taps does not. Confirm the boiler is on and the zone is warm. If the hot taps stay cold, book boiler repair. Do not open the cabinet.

What should I check before I call?

Confirm the boiler is running. Feel one radiator or a run of baseboard in the zone that should be heating. Try a second hot tap. If the zone is warm and every hot tap is cold, request boiler repair. If only one faucet is cold, say that when you call.

What if the showers work and the house is cold?

That is the opposite problem. The hot water is fine and the rooms are not. Use hot water but no heat from the boiler, and set the thermostat to Heat before you book.

Where do I book if the tap stays cold?

Open boiler repair, then request service. Say the heat is on and the hot water is not, and whether the boiler was running. Shop hours are Monday through Friday, 7:30 AM to 4:00 PM, Saturday by appointment.

Tap still cold?

Confirm the boiler is on and the zone is warm. If the hot water stays cold, book boiler repair and say what you found. Shop hours are Monday–Friday, 7:30 AM–4:00 PM, Saturday by appointment.